PON Loss Tester

  • Name:
  • PON Loss Tester
  • Model:
  • PPM-30
  • Specifications:
  • Brand:
  • Product Code:
  • Color:
  • Price:
  • Clicks:
  • 3627
  • Date:
  • 2012-07-02 11:30:22
  • Clicks:
  • Documents:
  • http://www.shinewaytech.com.cn/admin/./up/1346743352.pdf
    PPM-30 PON Power Meter                                                                                                                                                                      User Manual

    World Most Powerful Integrated PON Tester

      Specially designed for FTTx/PON (B/E/G) applications

      Easy operation: Connect fiber and get results

      Simultaneous Triple-play PON signals measurement:1310/1490/1550nm (Voice/Data/Video)

      Pass-through test: Applicable anywhere on PON

      Burst mode 1310nm upstream signal detection

      User-defined thresholds

      Pass/Warning/Fail assessment

      Optional Visible Fault Locator for macro bend detection and fiber identification

    ●  Optional Stabilized Laser Source and SM/MM Power Meter 

    PPM-30 PON Power Meter can perform in-service testing of all PON signals (1310/1490/1550nm) on any spot of the network featuring pass-through design, burst mode and Pass/Warning/Fail assessment function, which can greatly help you evaluate PON signals transmission quality.

     Pass-through Simultaneous Measurement & Display of All PON Signals

    PPM-30 works as a pass-through device, which can be connected anywhere between OLT and ONU. A small percentage of optical signals are extracted for use by PPM-30 detectors. This approach enables all wavelengths to be used simultaneously and introduces no interruption to network services.

     Pass-through connection and simultaneous measurement of all PON signals

     Filtered detectors for individual signal measurement at each wavelength

     Upstream signal burst mode detection at 1310nm

     Flexible Measurement on PON

    User-defined Threshold Sets  

    PPM-30 enables threshold setting?each set consists of three wavelengths (1310, 1490 and 1550nm) with their own Pass, Warning and Fail thresholds. These values can be configured for easy assessment of fibers, components and test points on network.




    Calibrated Wavelength




    Measurement Range (dBm)

    -40 ~ +10 (1)

    -40 ~ +12

    -40 ~ +20

    Spectral Passband (nm)




    Power Uncertainty (dB)

    ≤ 0.5

    Accuracy (dB)


    Insertion Loss (dB)

    ≤ 1.5

    Visible Fault Locator (Optional)

    Output Power (dBm)


    Max Measurement Range

    5 Km

    Optical Power Meter (Optional)

    Calibrated Wavelength (nm)


    Power Range (dBm) (2)

    -70 ~ +10

    Detector Type



    ± 5% ± 0.01nW(±0.5dB@850nm)

    MOD Identification

    270, 1K, 2K Hz

    Stabilized Laser Source (Optional)

    Wavelength (±20nm)

    1310, 1490, 1550nm

    Output Mode

    CW, 270Hz, 1KHz, 2KHz

    Spectrum Width (nm)


    Output Power (dBm)



    ±0.05dB/15min, ±0.10dB/8hr@ 1310/1550

    Output Power Display


    General Specifications

    Backlight Display



    FC/PC (Interchangeable SC, ST)

    Data Storage

    >2000 records

    Data Interface


    Power Supply

    NiMH Battery (1600mAh, 9.6V) / AC Adapter

    Battery Life

    ≥35 hours

    Operating Temperature

    -10 to 50

    Storage Temperature

    -25 to 70

    Relative Humidity

    0 to 95% (non-condensing)


    750g (1.6 lbs)

    Dimensions (H×W×T)

    196×100×44mm (7.7×3.9×1.7 inch)

    * Specifications subject to change without notice

    Note: (1) Burst mode measurement range at 1310 nm: -30 ~ +10dBm

              (2) The lower limit of measurement range at 850nm is -60 dB

    Ordering Information

    Standard package includes:

    Instrument, NiMH battery , Rubber boot, Data transfer cable (USB), PPM Manager Software CD, AC adapter, Toolkit for soft bag, Warranty card, CE certificate, Certificate of calibration, User manual.
All Products     |     Close

      All Products     |     Close